Owner's Manual

48 Dell Integration Pack Activities
Start Activity
The Start activity is used in a runbook to start a persona or VMRack that is
currently stopped.
For the procedure to configure this activity, see:
Configuring the Start Activity
The activity publishes all of the data from the required and optional
properties into returned data.
The following tables list the required and optional properties and returned
data for this activity
Use SSL Specifies whether or not the SSL
protocol was used to connect to the
Dell AIM server.
True o r Fals e
Table 2-27. Start Required Properties
Element Description Valid Values Look up
AIM Object Type The type of object that you
want to start.
Persona
VMRack
Yes
ID The ID of the object that
you want to start
String No
Table 2-28. Start Optional Properties
Element Description Valid Values Look up
Host The ID of the Host that
you want to start the
persona or VMRack on
String No
Timeout The number of seconds to
wait for the persona or
VMRack to start. If not
specified, the activity does
not wait
Integer No
Table 2-26. Run Operation Returned Data
Name Description Value Type
AIMOpalis_bk0.book Page 48 Monday, October 24, 2011 10:16 AM