Owner's Manual

46 Dell Integration Pack Activities
Run Operation Activity
The Run Operation activity is used in a runbook to invoke an AimWS
method, such as locking a persona to the server it has been assigned to or
disabling a network connection.
For the procedure to configure this activity, see,
Configuring the Run
Operation Activity
.
The activity publishes all of the data from the required and optional
properties into returned data.
The following tables list the required and optional properties and returned
data for this activity.
Table 2-24. Run Operation Required Properties
Element Description Valid Values Look up
Method Name The name of the invoked AimWS
method
String Yes
Table 2-25. Run Operation Optional Properties
Element Description Valid Values Look up
Parameter 1 The first parameter to pass to the
method.
String No
Parameter 2 The second parameter to pass to
the method
String No
Parameter 3 The third parameter to pass to the
method
String No
Parameter 4 The fourth parameter to pass to
the method
String No
Parameter 5 The fifth parameter to pass to the
method
String No
Parameter 6 The sixth parameter to pass to the
method
String No
Parameter 7 The seventh parameter to pass to
the method
String No
Parameter 8 The eighth parameter to pass to
the method
String No
AIMOpalis_bk0.book Page 46 Monday, October 24, 2011 10:16 AM