Owner's Manual

16 Dell Integration Pack Activities
The activity publishes all the data from the required and optional properties
into returned data. Additional return data is generated based on the AIM
Object Type that is associated with the Dell AIM Object Type configuration
that you select when you define the activity.
Get Object Activity
The Get Object activity is used in a policy to retrieve objects of a specified
type from the Dell AIM environment, such as retrieving all of the Networks,
Hosts or VMRacks.
For the procedure to configure this activity, see:
Configuring the Get Object
Activity
.
The Get Object activity uses filters to determine which Dell AIM objects is
returned. Filters are generated based on the AIM Object Type that is
associated with the Dell AIM Object Type configuration that you select when
you define the activity.
Returned data is generated based on the AIM Object Type that is specified in
the Dell AIM Object Type Configuration that you select when you define the
activity.
Table 2-1. Add Object Returned Data
Name Description Value Type
AIM Object Type The type of Dell AIM object
that you can add
String
AIM Server Location The location of the Dell AIM
server
String
AIM Server Port The port used to connect to
the Dell AIM server
Integer
AIM Username The username used to connect
to the Dell AIM server
String
Use SSL Specifies whether or not the
SSL protocol was used to
connect to the Dell AIM server
True o r False
AIMOpalis_bk0.book Page 16 Monday, October 24, 2011 10:16 AM