Specifications

54
General Safety Information
NOTE: In this document, product, equipment, and device are
used interchangeably and refer to all portable devices (such
as computers, port replicators, media bases, docking
stations, and similar devices), desktop computers, printers,
and monitors.
Use the following safety guidelines to help ensure your own personal
safety and to help protect your equipment and working environment
from potential damage.
You can find additional Safety Best Practices information on the
Regulatory Compliance Homepage on www.dell.com at the following
location: www.dell.com/regulatory_compliance.
WARNING: Use of controls, adjustments, procedures,
connections, or signal types other than those specified in
your documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
CAUTION: Dell products are not intended for use in patient
health care environments unless specially designated.
CAUTION: Dell products are not designed for use in
flammable or explosive environments.
When setting up the equipment for use:
• Place the equipment on a hard, level surface.
• Do not stack the equipment, place it in an enclosed space, or
otherwise install it where it is subject to heated air. The
equipment should have least 10.2 cm (4 inches) of clearance on
all vented sides to permit the airflow required for proper
ventilation. Restricting airflow can damage the equipment or
cause overheating.
G676R_A01_bk0.book Page 54 Friday, November 13, 2009 3:46 PM
Downloaded from LpManual.com Manuals