Owner's Manual

6. On the

Template Builder page, click a storage component, click Edit in the box that is displayed, and

then configure the following settings in the Storage Component dialog box. Repeat this step for

each storage components.

a. Under Storage Settings, configure the following:

1. From the Authentication drop- down list, select the one of the following authentication

types based on your environment: IQN/IP or CHAP.

2. If you have selected the authentication type as CHAP, enter the Chap username and Chap

secret for the storage volume

3. If you have selected the authentication type as IQN/IP, enter the Initiator IQN or IP

address for the storage volume.

NOTE

: If you do not update these password values, the template will not deploy correctly.

There is no value to passwords in the default template even if a masked value appears.

CHAP user names and secrets should be the same on both volumes if CHAP

authentication is used.

b. Verify the

Storage Volume Name.

c. Click Save.

7. On the Template Builder page, click a server component, click

Edit in the box that is displayed, and

then configure the following settings in the Server Components dialog box. Repeat this step for each

server components.

a. Under OS Settings, enter the Administrator password.

b. Under Network Settings, configure the Hypervisor Management Network, Hypervisor vMotion

Network, and Workload networks.

c. Click Save.

8. On the Template Builder page, click the cluster component, and configure the following:

a. Under

Cluster Settings, from the Target Hypervisor drop-down list, select the target vCenter.

b. Verify if you want to create a new datacenter or cluster inside your vCenter instance.

c. Click Save.

9. On the Template Builder page, click the virtual machine, and configure the following:

a. Enter the

Administrator password.

b. From the OS Image drop-down list, select the Windows Image to deploy Windows on the virtual

machine.

c. Verify the OS Image Version.

d. Enter the Product Key for corresponding OS Image Version.

e. Select the Workload networks to access this VM.

f. Click Save.