Owner's Manual

5. On the Template Builder page, click the Hyper-V cluster component, and configure the following
settings:
a. Make sure that you select your target SCVMM hypervisor from the Target Hypervisor drop-
down
list.
b. Select an existing host group from the Host Group drop-down list or enter the name of the host
group that you want to create in the New Host Group name field.
c. Enter the name of the Host Group you want to create or select the name of an existing host
group.
d. Modify the Cluster Name, if required.
e. Click Save.
6. Click Publish Template.
This template is now ready to be deployed.
Related Links
Template – Deploy Citrix XenDesktop 7 Application
Template – Deploy Citrix XenDesktop 7 Infrastructure for 1000 users
Template – Deploy OS to Hard Drive
Template – Deploy Physical Server and Virtual Machine
Template – Deploy VMs to Cluster
Template – Install ESXi to SD card with FC Storage
Template – Install ESXi to SD Card and iSCSI Storage
Template – Deploy HyperV Host with iSCSI Storage
Additional Template Information
This section provides additional details, including prerequisites, for creating or deploying certain types of
templates.
Deploying ESXi Cluster for SAN Applications
NOTE: This feature is supported only in Active System Manager (ASM), version 7.5.1.
When planning to deploy ESXi clusters for SAN applications using Dell Compellent Storage and Brocade
SAN switches (6505 or 6510), there are certain prerequisites to consider, and guidelines that should be
followed when creating a template, deploying a service, and cleaning up deployments.
Related Links
Creating Template for ESXi Cluster Deployment
Deploying Service on ESXi Clusters
Cleaning Up ESXi Cluster Deployments
ESXi Cluster Deployment Perquisites
ESXi Cluster Deployment Perquisites
Before utilizing this Active System Manager solution to deploy ESXi cluster using Dell Compellent storage
and Brocade (6505 or 6510) SAN switch, make sure that the prerequisites listed in the following table are
met.
45