Manualshelf

Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Active System Manager Version 7.5
41424344454647484950
10. Next, select the server component. Repeat the following steps for both servers.
a. Under the Settings section, in the Component Name text box, type the component name.
(Optional)
b. Under Hardware Settings
section, retain the value of Target Boot Device as default value of SD
Card.
c. Under the Hardware Settings section, from the Server Pool drop-down list, select
corresponding server pool.
d. To select the administrator password which configures on the deployed OS, under the OS
Settings section, in the Administrator password text box, type the administrator password.
e. Under the OS Settings section, in the Confirm administrator password, type the password
again.
NOTE: It is critical to update the password within this template. The value in the template is
masked, but the actual password is not set. If this password is not set, you cannot log in to
the deployed server.
f. Under the OS Settings section, from the OS Image drop-down list, select an OS for a hypervisor
(Example: ESXi 5.1 or ESX 5.5 ) which is configured to be deployed within your ASM managed
environment.
g. Under the OS Settings section, retain the ESXi value as default in the OS Image Type drop-down
list.
h. Under Network Settings section, update the network settings accordingly for the hypervisor
you are deploying and for the configured networks in your environment.
11. Next, select the cluster component.
12. Under the Cluster Settings section, select the target vCenter.
13. Under the Cluster Settings section, in the Data Center Name, Cluster, and
Cluster Data Store text
boxes, type their corresponding names.
14. To save the settings, click Save.
15. To publish the template, click Publish Template.
The template is now ready to be deployed.
Template – Deploy HyperV Host with iSCSI Storage
The Deploy HyperV Host with iSCSI Storage template deploys two iSCSI storage volumes and installs
Hyper-V on a physical host.
To deploy Hyper-V host with iSCSI storage using this template, perform the following steps:
1. On the Templates page, select the Deploy HyperV Host with iSCSI Storage template, and click
Clone
.
2. In the Create Template dialog box, enter a name and description for the template, and click Save.
42