Owner's Manual

Field Name Description

• IQN/IP

Chap username Specifies the CHAP username. A valid CHAP username must be less than or

equal to 63 alphanumeric characters. The access to CHAP username is

limited.

NOTE: The

Chap username and Chap secret fields are displayed only

if authentication type is selected as Chap.

Chap secret Specifies the CHAP password. A valid CHAP password must be less than or

equal to 254 characters. If the password is not specified, then it is

autogenerated.

Initiator IQN or IP

Addresses

Specifies the IQN or IP addresses that you want to set on the EqualLogic

storage volume to enable access for the IPs or IQNs.

Enter the comma-separated list containing the IP addresses or IQN

addresses. The list should not contain a white space.

A valid IP address list must be in the format:

172.19.15.2,172.19.15.3,172.19.15.4

A valid IQN address list must be in the format: iqn.

2001-05.com.dellsoftware01,iqn.2001-05.com.dellsoftware02,iqn.

2001-05.com.dellsoftware01

Compellent Storage Settings

Storage Volume Refers to the name of the volume that is to be created or destroyed.

Storage Size e.g 100g Specifies the volume size. Enter the number of 512-byte blocks or the total

byte size. To specify a total byte size, use k for kilobytes, m for megabytes,

g for gigabytes, or t for terabytes.

Boot Volume Specifies if the mapped volume is designated to be a boot volume.

Volume Folder Specifies the name of an existing volume folder where a volume is to be

created. In case the folder does not exist, a new folder is created.

Purge Volume This property indicates that the volume must be purged. If the purge

option is not specified, the volume is still visible using the volume show

command and contains the status of the Recycled. The possible values for

this parameter are yes or no

. The default value is yes.

Volume Notes Specifies the notes for the volume. By default, no notes are included.

Replay Profile Specifies the replay profiles for the volume.

Storage Profile Name Specifies the replay profiles for the volume.

Server Notes Refers to the optional user notes associated with the server.

Server Object Name Refers to the server name that is to be created or destroyed.