User's Manual

Working with Templates
11-30 Active System Manager User Guide, Release 7.1
Figure 11-13 Add Global Parameter
Note Global Parameters can only be added at the Template level using Active System Manager’s thick
client. Add operation cannot be performed using Active System manager web client
In Figure 11-13, you can select the either one of the following values:
• Encrypted: Selecting Encrypted allows you to enter a value that displays in the encrypted format.
• Static-List: Selecting Static-List allows you to enter comma separated values in Value List, that are
available in the drop-down in Default field.
• Dynamic List: Selecting Dynamic-List allows you to select a value for the defined parameter from the
Primary and Secondary sources.
Note For more information on Primary and Secondary value source, refer “Selecting Custom Operations”
section on page 13-4.
Edit
To edit the Global Parameters, click Edit, see Figure 11-11 on page 11-26.
Note The Global Parameters can be edited from both, the Active System Manager thick client and Web
client.
Note While editing Global Parameters, the name of the Global Parameter cannot be edited. However, you
can choose to edit the Description or Category of the selected parameter. You can also choose to
define the values as Encrypted, Static-List or Dynamic-List.