User's Manual

Working with Templates
11-28 Active System Manager User Guide, Release 7.1
Global Parameter
The Global Parameter feature facilitates you to define global parameters’ name, category and values at
Template level, and use them throughout the system. These pre-defined Global Parameters exist in the
system, and their value can be edited at the time of the following instances:
Note The Global Parameters defined for a Template are specific to that particular Template.
Provisioning System Setup Script Script file to run before a session becomes active.
By default, no Template-level setup script is used; instead,
the resource-level scripts are executed.
If the Template-level scripts are specified, the
resource-level scripts are not executed.
The
Template-level scripts provide any needed functionality
that would normally be handled by the resource-level
scripts.
Located on the
Active System
Manager server
.
Provisioning System Setup Time (Min.) Time spent before a session becomes active.
By default, the setup time for a Template is computed
based on parameters specified in the SDT for each of the
resources in the Template (i.e., the maximum time
required for any resource in the Template).
The SetUp Time property allows you to create additional
setup time for a Template. The number of minutes you
enter is added to the normally computed setup time for the
Template.
Specified in
minutes. The
default value is 0.
The value must be
in whole numbers.
Provisioning System Teardown Script Script file to run at the end of a session.
By default, no Template-level setup script is used; instead,
the resource-level scripts are executed.
If the Template-level scripts are specified, the
resource-level scripts are not executed.
The
Template-level scripts provide any needed functionality
that would normally be handled by the resource-level
scripts.
Located on the
Active System
Manager server.
Attachments Name
Description
You can add or remove attachments. To add a file
attachment, click Add, select a file from your file system,
click Open, and the file attachment is added.
To open the file attachment, select one and click Open.
To remove a file attachment, select a file attachment and
click Remove.
History Date
Author
Notes
Lists all history. For more information, see the “Managing
Template History Details” section on page 11-12.
Note The Active System Manager server can be preconfigured with a default set of custom
Template-level properties and default values for all sessions created in the system. For information
on how to set your default template (support for unit, list of default values, IsEditable attribute
definition).
Table 11-4 Template-Level Properties (continued)
Tab Name Category Property Description Value