Solution Guide

Active System Manager Solution Guide—Active System 800 (AS800)
39
Figure 34. Open with Multi-Editor
The following parameters must be updated:
 ISCSIvNICIPAddresses—Space-separated list of IP addresses to be assigned to iSCSI
virtual network interface cards (vNICs). For example, for updating information for
“vmnic6 vmnic7” using the Update Port Group with iSCSI VLAN operation, the value can
be in the 192.168.120.XX 192.168.120.YY format. as an example and will depend on the
environment subnet range. The IP Addresses needs to be separated by a space “ “
 iSCSIChapUsername—iSCSI Chap username used to access volume of EqualLogic Storage
Array
 iSCSIChapSecret—iSCSI Chap secret corresponding to iSCSI Chap username.
 ServerHostname—Hostname to be assigned to the ESXi server.
 ServerDomainName—Domain name to be assigned to the ESXi server.
 ServerNameServer—Name server to be assigned to the ESXi server. If there are
multiple name servers, a comma “,” separated valued should be provided.