Solution Guide

Active System Manager Solution Guide—Active System 800 (AS800)
26
2.5 Configuring Active System Manager Services
2.5.1 Starting Services
Appliance is configured to start Active System Manager services during start-up. Following are the steps
for starting the appliance manually.
1. Log in as the delladmin user. The password is listed in the 2.1 Deploying OVF section.
2. Execute the following command:
cd $HOME/asm-galeforce/gf/sbin
./startGF.sh
Note:
The Active System Manager services must not be started by the root user.
2.5.2 Stopping Services
Following are the steps for stopping the services manually.
1. Log in as the delladmin user. The password is listed in the 2.1 Deploying OVF section.
2. Execute the following command:
cd $HOME/asm-galeforce/gf/sbin
./stopGF.sh
2.5.3 Verifying Service Status
To verify that all Active System Manager services are up and running, perform the following steps:
1. Log in as the delladmin user. The password is listed in the 2.1 Deploying OVF section.
2. Run the following script to display the current status of all services, including the Oracle
database status:
cd asm-galeforce/gf/sbin
./gfstatus.sh
Below is sample output:
Active System Manager Services Status
Installation
----------------
Release Version: 7.0
Build Number: 21286
Database
----------------