Solution Guide

Active System Manager Solution Guide—Active System 800 (AS800)
21
6. Select the network. The VM should be mapped to the Hypervisor Management Network. All the
networks (for example, OOB, Hypervisor Management, vMotion, iSCSI, and VM workloads) are
expected to be accessible from the appliance.
Figure 11. Selecting the Network
7. Click Connect to launch the console.
Figure 12. Connecting to Launch the Console
2.3 Assigning IP Address to the Active System Manager
To assign the IP Address to the Active System Manager appliance, perform the following steps:
1. On the vSphere or Hyper-V Manager client, select the deployed Active System Manager
appliance and open its console.