Release Notes

Issue: ASM-4915 : ESXi install to SD card fails.
Description : While installing ESXi, a problem with the SD card mirroring may
result in a failure occasionally and will display the following error:
BANK5: invalid configuration.
BANK6: invalid configuration.
No hypervisor found.
Resolution/Workaround : Delete the server from the ASM service and
redeploy it again.
Issue: ASM-5132 : On PowerEdge C6320 systems with ESXi version 5.1 or ESXi version 5.2
(update 2), the keyboard is unresponsive if USB 3.0 is set to enabled in the server BIOS.
Description : This issue occurs because USB 3.0 is not supported by ESXi
version 5.1 and ESXi version 5.2 (update 2).
Resolution/Workaround : Try any of the following options to resolve the
issue:
Disable USB 3.0 from the server BIOS.
For servers that require USB 3.0, upgrade ESXi to version 5.5 (update 3) or
version 6.0.
Issue: ASM-5397 : Unable to login to the user interface.
Description : The user interface is inaccessible when you login after updating
to ASM 8.2.
Resolution/Workaround : Ensure that you clear the browser cache after
updating ASM and before logging in the user interface.
Issue: ASM-5510 : Removing the battery from a controller on a Dell Compellent storage
device displays an inaccurate message.
Description : After you remove the controller battery on a Dell Compellent
storage device, an incorrect error message is displayed on the
Resource
page.
Resolution/Workaround : None.
Issue: ASM-5984 : Static IP addresses are requested or reserved for Server (Hardware Only)
components.
Description : When deploying an ASM template with a Server (Hardware
Only)
configuration, IP addresses are reserved for all static networks included
on the network configuration of the component. Because this is a "hardware
only" component ASM does not configure the server to use these IPs.
Resolution/Workaround : Ensure that you do not assign static networks to
the
Server (Hardware Only) components or ensure that the static networks
that are used have enough IP addresses that can be assigned to the
component.
Issue: ASM-6219 : Backup and restore may reject valid CIFS share credentials.
Description : ASM may reject valid credentials in cases where CIFS shares
have anonymous or guest privileges.
Resolution/Workaround : Clear the credentials and retry the operation.