Install Guide

4. After uploading the license file, the following information about the license is displayed:
• License Type
• Number of Resources
• Number of Used Resources
• Number of Available Resources
5. To replace the evaluation license with standard license, click Add under License Management section, click Browse beside
Upload License and select a regular standard license file, and then click Open.
You get information regarding license type, number of resources and expiration date of the uploaded license on License
Management window.
6. Click Save to apply the standard license.
It replaces the evaluation license with standard license.
After uploading the license file, the following information about the license is displayed:
• License Type
• Number of Resources
• Number of Used Resources
• Number of Available Resources
You can add multiple standard licenses. After uploading multiple licenses, all the licenses are aggregated together and displayed as
one under License Management section.
NOTE: If you try to upload the same standard license second time, you get an error message stating that License has
already been used.
Important Note
Engaging support requires that all pre-requisites are fulfilled by customer or deployment team. Third-party hardware support is not
provided by Dell services. Discovery, inventory, and usage of third-party hardware must be in the expected state as described in the
pre-requisites and configuring sections of this guide.
ASM Port and Protocol Information
The following ports and communication protocols used by ASM to transfer and receive data.
Table 1. ASM Port and Protocol Information
Ports Protocols Port Type Direction Use
7 Echo TCP/UDP Inbound/Outbound IP address conflict resolution
22 SSH TCP Inbound /Outbound I/O Module
23 Telnet TCP Outbound I/O Module
53 DNS TCP Outbound DNS Server
67, 68 DHCP UDP Outbound DHCP Server
69 TFTP UDP Inbound Firmware Updates
80, 8080 HTTP TCP Inbound /Outbound HTTP Communication
123 NTP UDP Outbound Time Synchronization
7