Users Guide

For a DHCP network following information is displayed:

• Last Updated By

• Date Last Updated

• Created By

• Date Created

You can filter the IPs by selecting any of the following options from the View drop-down menu, under the Static IP Address Details

section:

• ALL IP Addresses

• IP Addressees in Use

• Available IP Addresses

NOTE: You can also select the links under the IP Addresses in Use column. The IPs are automatically filtered based on

the IP addresses In Use criteria.

Related links

Network types

Defining or editing existing network

Deleting a network

Defining or editing existing network

Adding the details of an existing network enables ASM to automatically configure chassis, servers, and I/O modules that are

connected to the network.

To define or edit an existing network:

1. On the home page, click Settings, and then click Networks.

The Networks page is displayed.

2. Perform one of the following:

• To define a network, click Define.

The Define Network page is displayed.

• To edit an existing network, select the network that you want to modify, and click Edit. The Edit Network page is

displayed.

3. In the Name field, type the name of the network.

4. Optionally, in the Description field, type a description for the network.

5. From the Network Type drop-down list, select one of the following network types. For more information about network types,

see Network Types

• Private LAN

• Public LAN

• SAN [Software iSCSI]

• Hypervisor Management

• Hypervisor Migration

• Hypervisor Cluster Private

• OS Installation

• Fileshare

• FIP Snooping

• VSAN

• Hardware Management