Users Guide
NOTE: On PowerEdge M1000e systems, you can select either VLT or Uplink for any of the ports, however, you must
ensure to match port-to-port.
NOTE: VLT configuration does not support using both 10 Gb and 40 Gb ports at the same time. Ensure that you use the
same type of port while configuring VLT.
Completing the chassis configuration
1. On the Summary page, click Finish to apply the configuration on the chassis you have selected.
In the Resources → All Resources tab, the state of the chassis is displayed as Updating until the configuration is complete.
2. If you want to modify the chassis configuration settings, click Back.
Adding or editing Chassis Management Controller (CMC) user
1. On the Create Local User page, enter User Name of an account.
2. Enter the Password for the user account to log in to CMC. Reenter the password for confirmation.
3. Select one of the following Roles to assign to user account:
• Administrator
• Power User
• Guest User
• None
4. To enable this user account, select Enable User check box. Clear the Enable User check box to add the user in a disabled state.
Adding or editing Integrated Dell Remote Access Controller (iDRAC) user
1. On the Create Local User page, enter User Name of an account.
2. Enter the Password for the user account to log in to iDRAC. Reenter the password for confirmation.
3. Select one of the following Role to assign to user account:
• User
• Operator
• Administrator
• No Access
4. To enable this user account, select Enable User check box. Clear the Enable User check box to add the user in a disabled
state.
Updating resource inventory
NOTE: Only the user with Administrator or Standard role can run the inventory on the resources. However, Standard
user can only run the inventory on the resources that are part of server pool for which they have permission.
To manually run the inventory operation and update ASM with the latest resource data:
1. On the home page, click Resources.
2. On the Resources page, click the All Resources tab.
3. From the list of resources, click a resource, and in the Details pane, click Run Inventory.
When you select C- series server on resource page and click Run inventory, you will not get all the inventory details for C 622O
server. You will only get basic information about it. After you deploy the server, you will get detailed information about it.
An inventory job is scheduled, the resource state changes to Pending. When the inventory is complete, the resource state
changes to Available. See ASM logs to view the start time and end time of the resource inventory operation.
80