Users Guide

Field Name Description

Chap secret Specifies the CHAP password. A valid CHAP password must be less than or equal to 254

characters. If the password is not specified, then it is generated automatically.

Initiator IQN or IP Addresses Specifies the IQN or IP addresses that you want to configure on the EqualLogic storage

volume to enable access for the IPs or IQNs.

Enter the comma-separated list containing the IP addresses or IQN addresses. The list should

not contain a white space.

A valid IP address list must be in the format: 172.19.15.2,172.19.15.3,172.19.15.4

A valid IQN address list must be in the format: iqn.2001-05.com.dellsoftware01,iqn.

2001-05.com.dellsoftware02,iqn.2001-05.com.dellsoftware01

Compellent Storage Settings

Target Compellent Specifies the compellent storage device where the volume is created.

Storage Volume Name Specifies the name of the volume that is to be created or destroyed.

Storage Size e.g. 100 GB Specifies the volume size. Enter the number of 512-byte blocks or the total byte size. To

specify a total byte size, use k for kilobytes, m for megabytes, g for gigabytes, or t for

terabytes.

Boot Volume Specifies if the mapped volume is designated to be a boot volume.

Volume Folder Specifies the name of an existing volume folder where a volume is to be created. In case the

folder does not exist, a new folder is created.

Purge Volume This property indicates that the volume must be purged. If the purge option is not specified,

the volume is still visible using the volume show command and contains the status of the

Recycled. The possible values are yes or no. The default value is yes.

Volume Notes Specifies the notes for the volume. By default, no notes are included.

Replay Profile Specifies the replay profiles for the volume.

Storage Profile Name Specifies the replay profiles for the volume.

Server Notes Specifies the optional user notes associated with the server.

Operating System Name Specifies the operating system type, which is set in the Compellent server object of the

Compellent storage center.

Server Object Folder Specifies the folder for the server.

Server WWN Values Specifies a globally unique World Wide Name (WWN) for the requested HBA.

Port Type Refers to the transport type for all HBAs being added. This option is required if the manual

flag is set. The possible values are Fibre Channel and iSCSI. For iSCSI Compellent set the port

type to iSCSI.

Manual This parameter sets an optional flag to configure the requested HBAs before the HBAs are

discovered. If the WWN matches a known server port, then this flag is ignored. If this flag is

present, then the Port Type must also be specified. The possible values are true or false.

Force Map If the value of this property is defined, it forces mapping, even if the mapping exists. The

possible values are true or false.