Users Guide

NOTE: Changing the firmware repository may update the firmware level on servers for this service. Firmware on
shared devices is maintained by the global default firmware repository.
7. To grant access to standard users to use this template, click the Manage Service Permissions check box, select any one of
the following options:
• All Standard Users — Select this option to provide access to all standard users.
• Specific Standard Users — Select this option to provide access to specific users. Click + Add User(s) to add the users.
To remove users added to list, select the user and click Remove User(s).
8. Click Next.
The Additional Settings page is displayed.
9. Under Network Settings, select new network from the Select New Network drop-down menu.
10. Under OS Settings, do the following:
a. Type the OS administrator password in the OS Administrator Password box.
b. Select the new OS repository from the Select New OS Repository drop-down menu.
11. Under Server Pool Settings, select the new server pool from the Select New Server Pool drop-down menu.
12. Click Finish.
Deploying service
NOTE: You cannot deploy a service using a template that is in draft state. Publish the template before you use the
template to deploy a service.
To deploy a service:
1. On the home page, click Services.
The Services page is displayed.
2. On the Services page, click Deploy New Service.
The Deploy Service wizard is displayed.
3. On the Service Information page, perform the following steps, and click Next.
a. From the Select Published Template drop-down list, select the template to deploy a service.
b. Enter the Service Name (required) and Service Description (optional) that identifies the service.
c. If you want to update the firmware and software running on the servers that are part of the service, select Manage
Server Firmware check box, and from the Use Firmware Repository drop-down, select a firmware repository.
NOTE: Changing the firmware repository may update the firmware level on servers for this service. Firmware
on shared devices will still be maintained by the global default firmware repository.
d. Type a number that indicates the number of deployments that is required for a service.
e. If you want to grant permission for Standard users to use this service, under Manage Service Permissions, select the In
addition to all Admins, grant Standard Users access to this service check box, and perform one of the following
actions:
• To grant access to all Standard users for this service, select All Standard Users option.
• To grant access only to specific Standard users for this service, select Specific Standard Users option, and perform
the following tasks:
a. To add one or more Standard users to the list, click Add User(s).
To remove the Standard user from the list, select the Standard user and click Remove User(s).
b. After adding the Standard users, select or clear the check box next to the Standard users to grant or block
access to the service.
4. Click Next.
The Deployment Settings wizard is displayed.
5. On the Deployment Settings page, configure the required settings and click Next.
Configuring Hardware Settings:
39