Users Guide

To log in to ASM using Active Directory, use forward slash "/". For example: <domain>/ <username>.
NOTE: Domain is the name for the Active Directory service you have created in ASM.
Chain booting issue occurs while booting microkernel in a multi-hop
DHCP environment
The chain booting error occurs if the DHCP server is configured in a different subnet or network or connected to a different switch.
In such scenarios, the DHCP network is tagged.
To resolve this issue, in switch configuration, modify the native VLAN of server or computer facing ports to PXE VLAN.
Sample native VLAN configuration in Dell PowerConnect switch:
interface Gi1/0/2
spanning-tree portfast
switchport mode general
switchport mode general
switchport general allowed
vlan add 3000
switchport general allowed
vlan add 20,30,40 tagged
exit
In the above example:
• 3000: Indicates Native PXE VLAN
• 20,30,40: Indicates Management or vMotion or ISCSI
In case of production environments with large networks, routers may be configured with IP Helper Addresses to point to a DHCP on
another network.
The health status for Compellent storage devices displays as Unknown
on the Resources page
Make sure that the Compellent SNMP agent is configured with the same public string that is used in the Compellent credentials, the
SNMP agent is started, and enabled on the device.
Scaling down a server that is part of a cluster with HA and DRS
disabled does not remove the server from vCenter. The associated
virtual machines may also appear in a Disconnected state.
It is recommended that before you scale down a server, you must migrate the VMs to a different host if HA and DRS are not
enabled on the cluster.
120