Install Guide

• Standard License—A standard license grants full access.
After purchasing ASM, an email is sent from customer service containing instructions for downloading ASM software components,
the ASM license le, and the ASM Service Tag.
If you are using ASM for the rst time, you must upload the license le using the Initial Setup wizard. To upload and activate
subsequent licenses, click Settings → Virtual Appliance Management.
1. Under the License Management section, on the Virtual Appliance Management page, click Add. The Add License window is
displayed.
2. Click Choose File beside Upload License and select an evaluation license le, and then click Open.
The License Management window with the license type, number of resources, and expiration date of the uploaded license is
displayed.
3. Click Save to apply the Trial license.
4. After uploading the license le, the following information about the license is displayed:
• License Type
• Number of Resources
• Number of Used Resources
• Number of Available Resources
• Expiration Date
5. To replace the evaluation license with standard license, click Add under License Management section, click Choose File beside
Upload License and select a regular standard license le, and then click Open.
You get information regarding license type, number of resources and expiration date of the uploaded license on the License
Management window.
6. Click Save to apply the standard license.
It replaces the evaluation license with standard license.
You can add multiple standard licenses. After uploading multiple licenses, all the licenses are aggregated together and displayed as
one under the
License Management section.
NOTE: If you try to upload the same standard license second time, you get an error message stating that License has
already been used.
Important Note
Engaging support requires that all pre-requisites are fullled by customer or deployment team. Third-party hardware support is not
provided by Dell services. Discovery, inventory, and usage of third-party hardware must be in the expected state as described in the
pre-requisites and conguring sections of this guide.
ASM Port and Protocol Information
The following ports and communication protocols are used by ASM to transfer and receive data.
Table 1. ASM Port and Protocol Information
Ports Protocols Port Type Direction Use
22 SSH TCP Inbound /Outbound I/O Module
23 Telnet TCP Outbound I/O Module
53 DNS TCP Outbound DNS Server
67, 68 DHCP UDP Outbound DHCP Server
7