Install Guide
Specication Pre-requisite
For more information about creating alias, see Brocade for the Dell Compellent Compellent
section in this topic.
• Before initiating ASM service to create a volume on a newly congured Dell Compellent
Storage array, create a temporary volume. A Storage type is instantiated on the Compellent
Storage array, and used in creating a volume by ASM.
Dell Compellent iSCSI on MXL
with Hyper V
• Enable LLDP and its corresponding attributes.
• DCB (with no PFC option) on the participating interfaces—Server Facing and Port-Channel
Members. Since DCB is globally enabled, the PFC should be turned o individually in those
interfaces.
• Link Level Flow control (LLFC) must be Rx ON and Tx OFF on the respective interfaces.
• MTU must be set to 9216 on respective interfaces.
Sample server facing interface conguration
FTOSA1#show running-cong interface tengigabitethernet 0/15
!
interface TenGigabitEthernet 0/15
no ip address
mtu 9216
portmode hybrid
switchport
owcontrol rx on tx o
spanning-tree 0 portfast
spanning-tree pvst edge-port
dcb-map DCB_MAP_PFC_OFF
!
protocol lldp
advertise management-tlv management-address system-name
dcbx port-role auto-downstream
no shutdown
Sample port-channel member interface conguration
FTOSA1#show running-cong interface tengigabitethernet 0/41
!
interface TenGigabitEthernet 0/41
no ip address
mtu 9216
dcb-map DCB_MAP_PFC_OFF
12