Compatibility Matrix

Resource
Supported Version
From To
Dell Networking S5000 (Ethernet only)
9.10 9.10
Dell Networking S6000
9.10 9.10
Dell Networking S4048-ON
9.10 9.10
Dell Networking S4048-ON Base T
9.10 9.10
Dell Networking S4810
9.10 9.10
Dell Networking S4820T
9.10 9.10
Dell Networking MXL 10/40GbE blade switch
9.10 9.10
Dell Networking 8/4Gbps FC SAN Module
7.2.0.a 7.2.0.a
Dell PowerEdge M I/O Aggregator switch
9.9.0 9.10
Cisco Nexus 5500 series (Ethernet only)
6.0(2)N2(3)+ 6.0(2)N2(3)+
Cisco Nexus B22 Fabric Extender**
N/A N/A
Brocade 300
7.3.0c 7.4.1b
Brocade M5424***
7.3.0.c 7.3.0.c
Brocade M6505***
7.3.0.a 8.0.1
Brocade 6510
7.3.0.a 8.0.1
Brocade 6520
7.3.0.c 8.0.1
Flex IO Module for IOA and MXL
N/A N/A
FN IO Aggregators for FX2
9.10 9.10
10GbE pass-through for FX2
N/A N/A
*Firmware update support only, not supported for use in service deployments.
**On systems with Cisco Nexus B22 Fabric Extenders, certain servers may experience reduced network connectivity. This issue
occurs because the servers may have additional ports than what is supported by the B22 Fabric Extender.
***Access gateway mode only.
Supported Adapters and Firmware Matrix
The following table provides information about the supported adapters:
12