Release Notes

Resolution/Workaround : As a best practice for all imported templates, clear
the password field and set them correctly.
• Issue: ASM-6311 : Stale Active Directory account entries for HyperV host and cluster can fail
HyperV deployments.
Description : A HyperV deployment may fail if stale Active Directory account
entries corresponding to a host or a cluster name are used in a deployment.
Resolution/Workaround : Ensure that you clear the unused and stale entries
from Active Directory and then try a deployment.
• Issue: ASM-6319 : On the Network Details page, released IP Addresses appear under the
old service.
Description : After you scale down a server or virtual machine, the IP address
used by the component is released and available for reuse in the future.
However, on the
Network Details page for the network the IP Address
belongs to, the IP Address is listed under the old service using it. This issue
occurs until the IP Address is used by another service.
Resolution/Workaround : None.
Li mitations
None
Installation Prerequisites
For installation pre-requisites, see the “ Active System Manager 8.2 Installation Guide ” available at
dell.com/asmdocs.
Installation Procedure
For complete installation instructions, see the " Active System Manager 8.2 Installation Guide " available at
dell.com/asmdocs.
Installation and Configuration Notes
None
Documentation Errata
None
Contacting Dell Technical Support
• Make sure that the Active System Manager Service Tag is available.
• Go to the tech direct portal https://techdirect.dell.com
• Login using your existing account or create an account if you do not have an account.
• Create a new case for your incident.
• Add your Active system Manager service tag.
• Select Active System Manager as the Incident type
• Type relevant information in the Problem Details, and add attachments or screenshots if
necessary.
• Fill in contact information and submit the request