Users Guide
2. Specific Standard Users — Select this option to provide access to specific users. Click +Add
User(s) to add the users. To remove users added to list, select the user and click Remove
User(s).
f. Click Save.
4. On the Template Builder page, click each storage component, click Edit in the box that is displayed,
and configure the following settings in the
Storage Component window.
a. Modify the Component Name with a unique name, if necessary.
b. Under the Associated Resources section, select Associate All Resources or Associate Selected
Resources
to associate all or specific components to the new component.
c. Click Continue.
d. Under Compellent Storage Settings, configure the following:
1. From the Target Compellent drop-down menu, select the target Compellent array.
2. In the Storage Volume Name box, type a unique name.
3. In Storage Size e.g 100GB text box, type the storage size.
NOTE: Do not modify the Boot Volume settings.
4. In the Volume Folder, Purge Volume, Volume notes, Replay Profile, Storage Profile Name,
Server WWN Values, and Server Notes text boxes, type the details. (Optional).
5. From the Operating System Name drop-down menu, select the appropriate operating
system.
6. Retain the default values for Port Type, Manual, Force Map, Map Read Only, and Single Path
Map, and Configure SAN Switch.
7. Click Save.
5. On the Template Builder page, click each server component and click Edit to configure the
components.
The Server Component window is displayed.
6. On the Server Component window, configure the following options:
a. Modify the Component Name with a unique name, if necessary.
b. Under the Associated Resources section, select Associate All Resources or Associate Selected
Resources to associate all or specific components to the new component.
c. Click Continue.
d. Under Hardware Settings, configure the following:
1. Retain the default selection of SD Card for Target Boot Device.
2. Select a Server Pool that contains a target server from the drop-down list.
e. Under OS Settings, configure the following:
1. From the OS Image drop-down menu, select the OS image.
2. Edit the Administrator password for the ESXi host.
NOTE: If the default value for Install EqualLogic MEM is True, EqualLogic Multipathing
Extension Module is installed.
3. If you select the Auto-generate Host Name check box, a Host Name Template field is
displayed.
On Host Name Template field, type unique host name for deployment. You must use
variable while generating host name.
4. Type the IP address of the NTP Server for time synchronization.
f. Under Network Settings,
1. Leave the Identify Pool drop-down menu set to Global pool.
83