Users Guide

NOTE: To fully support vSAN, it is recommended to use ESXi 6.0 update 2 or later. The current
version shipping with Active System Manager may not be this version. To determine the version
of ESXi 6.0 which ships with your version of Active System Manager, see Compatibility Matrix.
For more information on the OS Settings and Hardware Settings, see Server settings.
6. Under Network Settings, clear the Enable Partitioning Ports check box, you can add VLAN for
networks — Hypervisor Management, Hypervisor Migration, OS Installation, and Public or Private LAN
on the same partition.
7. Create another interface, clear the Enable Partitioning Ports check box, add the VSAN VLAN and
select the redundancy check box.
For more information on the Network Settings, see Server settings.
For cluster component settings:
Table 7. Cluster component settings
Options Descriptions
Target Virtual Machine Manager Select virtual machine manager from the Target
Virtual Machine Manager drop-down menu.
Data Center Name Select data center name from Data Center Name
drop-down menu.
New Data Center Type the new data center name in the New Data
Center box.
Cluster Name Select new cluster name from Cluster Name drop-
down menu.
New cluster name Type new cluster name in the New cluster name in
the New cluster name box.
Switch Type Select the switch type as Distributed.
Cluster HA Enabled Enables or disables highly available cluster.
You can either select or clear the check box. By
default, it is unchecked.
Cluster DRS Enabled Enables or disables distributed resource scheduler
(DRS).
You can either select or clear the check box. By
default, it is unchecked.
Enable VMware vSAN Select the Enable VMware vSAN check box.
vSphere VDS Settings
Under vSphere VDS Settings, create appropriate network type such as Hypervisor Management,
Hypervisor Migration, OS Installation, and Public or Private LAN.
67