Users Guide

NOTE: Changing the firmware repository may update the firmware level on servers for this

service. Firmware on shared devices will still be maintained by the global default firmware

repository.

d. Type a number that indicates the number of deployments that is required for a service.

e. If you want to grant permission for Standard users to use this service, under Manage Service

Permissions, select the In addition to all Admins, grant Standard Users access to this service

check box, and perform one of the following actions:

• To grant access to all Standard users for this service, select All Standard Users option.

• To grant access only to specific Standard users for this service, select Specific Standard

Users option, and perform the following tasks:

a. To add one or more Standard users to the list, click Add User(s).

To remove the Standard user from the list, select the Standard user and click Remove

User(s).

b. After adding the Standard users, select or clear the check box next to the Standard users

to grant or block access to the service.

4. Click Next.

The Deployment Settings wizard is displayed.

5. In the Deployment Settings page, configure the required settings. click Next.

Configuring Hardware Settings:

a. Select server source from the Server Source drop-down menu.

You can select Server Pool or Manual Entry from Server Source drop-down menu.

b. Select server pool from the Server Pool drop-down menu.

If you select Server Pool from the Server Source drop-down menu, in that case you can view all

user-defined server pools along with the Global pool. Standard users can see only the pools that

they have permission.

If you select Manual Entry, instead of Server Pool, Choose Server drop-down menu is displayed.

From the Choose Server drop-down menu, you can manually select server with its service tag for

deployment from the list under the Choose Server drop-down menu.

NOTE: Select the Retry On Failure option to ensure that ASM selects another server from

the server pool for deployment if any server fails.

NOTE: Each server may be retried up to five times.

Configuring OS Settings:

c. Under OS Settings section, from IP Source, click ASM Selected IP or User Entered IP.

1. To manually enter the IP address, click User Entered IP.

2. From the IP Source drop-down menu, select Manual Entry.

3. Type IP address in the Static IP Address text box.

6. In the Schedule Deployment page, perform one of the following actions:

• Deploy Now — Select this option to deploy the service immediately.

• Schedule Later — Select this option and enter the date and time to deploy the service.