Users Guide

To create a new template or clone an existing template, perform the following steps:

1. In the left pane, click Templates.

2. On the Templates page, click Create Template.

The Create Template dialog box is displayed.

3. Select either New or Clone Existing option.

In case of Clone Existing, select any existing template that is to be cloned. The components of the

selected template are cloned into the new template.

4. Enter a Template Name.

5. From the Template Category drop-down list, select a template category. To create a new category,

select Create New Category from the list.

6. Enter Template Description. (Optional).

7. If you want to update the firmware running on the servers when you deploy a service that uses this

template, select the Manage Server Firmware check box, and from the Use Firmware Repository

drop-down menu, select a firmware repository.

NOTE: Changing the firmware repository may update the firmware level on servers for this

service. Firmware on shared devices will still be maintained by the global default firmware

repository.

8. If you want to grant permission to Standard users to use this template, under Manage Service

Permissions, select the In addition to all Admins, grant Standard Users access to this service check

box, and perform one of the following actions:

• To grant access to all Standard users to this template, select All Standard Users option.

• To grant access only to specific Standard users to use this template, select Specific Standard

Users option, and perform the following tasks:

1. Click Add User(s) to add one more Standard users to list displayed.

To remove the Standard user from the list, select the Standard user and click Remove

User(s).

2. After adding the Standard users, select or clear the check box next to the Standard users to

grant or block access to use this template.

9. Click Save.