Users Guide

The valid license type supported is Standard license. Standard license is a full-access license type. After
uploading an initial license, you can upload subsequent licenses on the Virtual Appliance Management
page. Subsequent uploads replace the existing license.
1. On the home page, click Settings, and then click Virtual Appliance Management.
2. On the Virtual Appliance Management page, under the License Management section, click Add.
License Management window is displayed.
3. Click Browse button beside Upload License and select an Evaluation license file, and then click
Open.
You get information regarding license type, number of resources and expiration date of the uploaded
license. on License Management window.
4. Click Save to apply the evaluation license.
After uploading the license file, the following information about the license is displayed:
• License Type
• Number of Resources
• Number of Used Resources
• Number of Available Resources
• Expiration Date
5. To replace the Evaluation license with standard license click the same Add button under License
Management
section, click Browse button beside Upload License and select a regular standard
license file, and then click
Open.
You get information regarding license type, number of resources and expiration date of the uploaded
license. on License Management window.
6. Click Save to apply the standard license,
It replaces the evaluation license with standard license.
After uploading the license file, the following information about the license is displayed:
• License Type
• Number of Resources
• Number of Used Resources
• Number of Available Resources
You can add multiple standard licenses. In that scenario, details of all the licenses are displayed
together under License Management section on Virtual Appliance Management page.
NOTE: If you try to upload the same standard license second time, you get an error message
stating that License has already been used.
Editing default time zone and NTP settings
Changes on this page affect the time zone and NTP server(s) that are applied to ASM virtual appliance. All
time data is stored in UTC format, and is used to display log and event time stamps.
1. On the home page, click Settings, and then click Virtual Appliance Management.
2. On the Virtual Appliance Management page, under the Time Zone and NTP Settings section, click
Edit.
3. From the Time Zone drop-down list, select a time zone.
4. Type the IP address or hostname in Preferred NTP Server and Secondary NTP Server (optional) for
time synchronization.
157