Users Guide

a. Type a name in the Template Name box.
b. Select a category from the Template Category drop-down menu.
c. In the Template Description field, type a description for the template.
d. To update the firmware while deploying a service using this template, select the Manage Server
Firmware
check box and select a firmware repository from the Use Firmware Repository drop-
down menu.
NOTE: Changing the firmware repository may update the firmware level on servers for this
service. Firmware on shared devices will still be maintained by the global default firmware
repository.
e. To grant access to standard users to use this template, select any one of the following options
from the
Manage Service Permissions option:
1. All Standard Users — Select this option to provide access to all standard users.
2. Specific Standard Users — Select this option to provide access to specific users. Click +Add
User(s) to add the users. To remove users added to list, select the user and click Remove
User(s).
f. Click Save.
4. On the Template Builder page, click each storage component, click Edit in the box that is displayed,
and configure the following settings in the Storage Component window.
a. Modify the Component Name with a unique name, if necessary.
b. Under the Associated Resources section, select Associate All Resources or Associate Selected
Resources
to associate all or specific components to the new component.
c. Click Continue.
d. Under Compellent Storage Settings, configure the following:
1. From the Target Compellent drop-down menu, select the target Compellent array.
2. In the Storage Volume Name box, type a unique name.
3. In Storage Size e.g 100GB text box, type the storage size.
NOTE: Do not modify the Boot Volume settings.
4. In the Volume Folder, Purge Volume, Volume notes, Replay Profile, Storage Profile Name,
Server WWN Values, and Server Notes text boxes, type the details. (Optional).
5. From the Operating System Name drop-down menu, select the appropriate operating
system.
6. Retain the default values for Port Type, Manual, Force Map, Map Read Only, and Single Path
Map, and Configure SAN Switch.
7. Click Save.
5. On the Template Builder page, click each server component and click Edit to configure the
components.
The Server Component window is displayed.
6. On the Server Component window, configure the following options:
a. Modify the Component Name with a unique name, if necessary.
b. Under the Associated Resources section, select Associate All Resources or Associate Selected
Resources to associate all or specific components to the new component.
c. Click Continue.
d. Under Hardware Settings, configure the following:
1. Retain the default selection of SD Card for Target Boot Device.
2. Select a Server Pool that contains a target server from the drop-down list.
e. Under OS Settings, configure the following:
82