Users Guide

Options Description
Domain Name Specifies the domain name to which you want to add the host. For
example, aidev
FQ Domain Name Specifies the Fully Qualified Domain Name (FQDN) to which you want to
add the host. For example, aidev.com
Domain Admin Username Specifies the username to access the domain.
Domain Admin Password Specifies the admin password to add the host to the domain.
Domain Admin Password
Confirm
Enables you to reconfirm the admin password to add the host to the
domain.
Network Settings
Add New Interface Click Add New Interface option to create a network interface in a
template server component. Under this interface all network settings are
specified for a server. This interface is used to find a compatible server in
inventory, for example if "Two Port, 10 gigabit" is added to the template,
when the template is deployed ASM will match a server which has a two
port 10 gigabit network card as it's first interface.
For more information on adding a new interface, see Adding New
Interface.
Static Network Default
Gateway
Select the default gateway IP address for routing network traffic.
Identity Pool Select the virtual identity pool from which virtual identities (MAC address
and WWPN/WWNN) are selected for boot from SAN deployment.
NOTE: After entering the information about PXE network in the respective field as described in the
table above, ASM will untag vLANs entered by the user in the PXE network on the switch server
facing port. In case of vMotion and Hypervisor network, for the entered information ASM tags these
networks on the switch server-facing ports. In case of Rack Server, ASM will configure those vLANs
on TOR server facing ports (untag PXE vLANs, and tag other vLANs). In the case for Blade Servers,
ASM will configure those vLANs on the IOM server facing ports(untag PXE vLANs and tag other
vLANs).
Adding New Interface
Under Network Settings, perform the following settings:
NOTE: Add New Interface is used to create a new network interface to match to a network card on
the server when deploying a template.
1. On the server component page, under Network Settings, click Add New Interface. A new interface
section is displayed.
NOTE: Add new interface feature is used to create a new interface to match with the interface
on the server before deploying a template
56