Users Guide

* Asset/Service Tag
– Under Physical Servers, you can view the following information about the servers that are part of a
service:
* Hostname
* IP Address
* Hypervisor IP Address
* Asset/Service Tag
– Under Storage, you can view the following information and view the volumes created on a
particular storage and the size of the volumes.
* IP Address
* Asset/Service Tag
• Under Service Information, you can view the following information:
– Name of the service
– Overall Service Health — Displays health of the service. The overall service health is determined by
the following:
* Resource Health — Displays the health monitoring of resources reported by Dell OpenManage
Plug-in for Nagios Core.
* Firmware Compliance — Displays if the resources are firmware-compliant. This option is
applicable only if you have enabled firmware update on the service.
* Deployment State — Indicates if the deployment of the service completed successfully.
Table 2. Service States
Service State Icon Description
In Progress Indicates that service deployment is in progress.
Error Indicates that service deployment is failed due to some issues.
Healthy Indicates that service is deployed successfully and the
resources are firmware complaint and healthy.
Warning Indicates that the one of more resources that are part of a
service is in a state that requires corrective action, but does
not affect overall system health. For example, the firmware
running on the resource is not at the required level or not
compliant.
View Logs — To view logs, select the component icon of a deployed service from the Component
States window on Service Information page, you get View Logs link. Click the View Logs link, you
get In progress, Error, Succesful, Warning, Informational log from View Logs. This is varied with
deployed service.
– Deployed By — Displays the name of the user who deployed the service.
– Deployed On — Displays the date and time when the service is deployed.
25