Users Guide

Editing DHCP settings
If you have already configured a DHCP server on the ASM appliance, you can edit the DHCP server
settings on the Virtual Appliance Management page.
To edit the DHCP server settings:
1. On the Virtual Appliance Management page, under the DHCP Settings section, click Edit.
2. In the DHCP Settings dialog box, modify the setting as needed. For more information on configuring
the DHCP settings, see
Configure DHCP Settings
Related Links
Configure DHCP settings
Editing proxy settings
If your network uses a proxy server for external communication, then you must type the critical
information to enable communication with ASM virtual appliance.
1. On the home page, click Settings, and then click Virtual Appliance Management.
2. On the Virtual Appliance Management, under the Proxy Settings section, click Edit.
3. Select Use HTTP Proxy Settings.
4. In the Server Address (IP or Hostname) box, type a server address for the proxy server.
5. In the Port box, type a valid port number from 1–65535. Commonly used ports for a proxy server are
80 and 8080.
6. If the proxy server requires credentials to log in, select Use Proxy Credentials and then in User Name
and Password boxes, type the required user name and password. To verify the password, type the
password in Confirm Password.
7. To validate the settings typed on this page, click Test Proxy Connection.
8. Click Save.
License management
ASM licensing is based on the total number of managed resources.
The valid license type supported is Standard license. Standard license is a full-access license type. After
uploading an initial license, you can upload subsequent licenses on the Virtual Appliance Management
page. Subsequent uploads replace the existing license.
1. On the home page, click Settings, and then click Virtual Appliance Management.
2. On the Virtual Appliance Management page, under the License Management section, click Add.
License Management window is displayed.
3. Click Browse button beside Upload License and select an Evaluation license file, and then click
Open.
You get information regarding license type, number of resources and expiration date of the uploaded
license. on License Management window.
4. Click Save to apply the evaluation license.
After uploading the license file, the following information about the license is displayed:
• License Type
• Number of Resources
• Number of Used Resources
153