Install Guide

Specification Pre-requisite

Sample port-channel member interface configuration

FTOSA1#show running-config interface tengigabitethernet 0/

interface TenGigabitEthernet 0/41

no ip address

mtu 12000

dcb-map DCB_MAP_PFC_OFF

port-channel-protocol LACP

port-channel 1 mode active

protocol lldp

advertise management-tlv management-address system-name

no advertise dcbx-tlv ets-reco

dcbx port-role auto-upstream

no shutdown

FTOSA1#

VMware vCenter 5.1, 5.5

or 6.0

• VMware vCenter 5.1, 5.5 or 6.0 is configured and accessible through the

management and hypervisor management network.

• Appropriate licenses are deployed on the VMware vCenter.

System Center Virtual

Machine Manager

(SCVMM)

• See System Center Virtual Machine Manager (SCVMM) Prerequisites.

PXE Setup

• Either use Active System Manager as the PXE responder by configuring

through ASM user interface, by Getting Started page or follow

instructions in Configuring ASM Virtual Appliance as PXE Responder.

Dell PowerEdge M1000e

chassis

• Server facing ports must be in hybrid mode.

• Server facing ports must be in switchport mode.