Users Guide

NOTE: The Initial Chassis Configuration page is displayed only when one or more chassis are

identified in the specified IP range.

a. Under Select Chassis For Initial Configuration, select one or more chassis for with you want

assign IP address and add credentials during discovery.

b. Under IP Addressing section, select the method for assigning IP address to chassis and servers

and I/O modules within the chassis.

c. Under Credentials section, select credentials to access chassis and servers and I/O modules

within the chassis.

5. On the Discovered Resources page, select the resources from which you want to collect the

inventory data, and click Finish.

The discovered resources are listed in the Resources page.

Related Tasks

Adding IP address range and credentials

Collecting the resource inventory

Adding IP Address and Credentials to Chassis

Adding IP address range and credentials

1. On the Identify Resources page, click Add Resource Type, and perform the following steps:

a. From the Resource Type drop-down list, select one of the following resource types:

• All

• Server

• Storage

• Switch

• vCenter

• SCVMM

• Chassis

b. Enter the Starting IP Address and Ending IP Address range of the resources of same type to

discover.

NOTE: You need to use management IP address to discover the NetApp storage resources.

c. From the Manage in ASM drop-down list, select one of the following options:

• Managed — Select this option if you want manage the resources in ASM.

• Unmanaged — Select this option if you do not want to manage the resources in ASM.

d. From the Credentials drop-down list, select an existing credential that includes the user name

and password to access the resource type, or click the Plus icon to create a new credentials.

NOTE: For Dell resources (chassis, servers, and I/O modules), use the default root-level user

name root, and password calvin for discovery. However, the default root-level credentials are

not supported for Dell Compellent Storage Center and Dell EqualLogic Storage.

2. To discover a different resource type and resources of same type with different credentials, repeat

the step 1.

3. Click Next to discover and collect the inventory data from the resources.