Users Guide
3. Unpack Microsoft SQL Server 2012 ISO into CIFs share on the virtual appliance. To perform this task,
run the following commands: cd /var/lib/razor/repo-store mount -o loop <SQL2012>.iso/mntrsync -
a /mnt/ /var/lib/razor/repo-store/ SQL2012umount /mntrm SQL2012.iso
4. On the ASM home page, in the left pane, click Templates, select the Deploy SQL Server 2012
template, and then click Clone.
5. In the Create Template dialog box, enter a name, category, and description. Click Save.
6. On the Template Builder page, click a storage component, click Edit in the box that is displayed, and
then configure the following settings in the
Storage Component dialog box. Repeat this step for
each storage components.
a. Under Storage Settings, configure the following:
1. From the Authentication drop- down list, select the one of the following authentication
types based on your environment: IQN/IP or CHAP.
2. If you have selected the authentication type as CHAP, enter the Chap username and Chap
secret for the storage volume
3. If you have selected the authentication type as IQN/IP, enter the Initiator IQN or IP
address for the storage volume.
NOTE: If you do not update these password values, the template will not deploy correctly.
There is no value to passwords in the default template even if a masked value appears.
CHAP user names and secrets should be the same on both volumes if CHAP
authentication is used.
b. Verify the Storage Volume Name.
c. Click Save.
7. On the Template Builder page, click a server component, click Edit in the box that is displayed, and
then configure the following settings in the Server Components dialog box. Repeat this step for each
server components.
a. Under OS Settings, enter the Administrator password.
b. Under Network Settings, configure the Hypervisor Management Network, Hypervisor vMotion
Network, and Workload networks.
c. Click Save.
8. On the Template Builder page, click the cluster component, and configure the following:
a. Under Cluster Settings, from the Target Hypervisor drop-down list, select the target vCenter.
b. Verify if you want to create a new datacenter or cluster inside your vCenter instance.
c. Click Save.
9. On the Template Builder page, click the virtual machine, and configure the following:
a. Enter the Administrator password.
b. From the OS Image drop-down list, select the Windows Image to deploy Windows on the virtual
machine.
c. Verify the OS Image Version.
d. Enter the Product Key for corresponding OS Image Version.
e. Select the Workload networks to access this VM.
f. Click Save.
10. On the Template Builder page, click one of the application components, click Edit in the box that is
displayed, and then configure the following settings in the Application Component dialog box:
84