Users Guide
The template is now ready to be deployed.
Template – deploy operating system to hard drive
This template deploys an OS to the local hard disk drive of a bare metal server. A single server component
is available in the Template Builder.
1. In the Templates page, select the Deploy OS to Hard Drive template, and then click Clone in the
right pane.
2. In the Create Template dialog box, enter the Template Name and Template Description.
3. Click Save.
4. In the Template Builder, click the server component, click Edit in the dialog box that is displayed, and
then configure the following settings in the Server Component dialog box.
5. In the Component Name box, type the component name. (Optional)
6. Under Hardware Settings, perform the following:
a. From the Target Boot Device drop-down list, select the corresponding target boot device.
b. From the Server Pool drop-down list, select the corresponding server pool.
7. Under OS Settings, perform the following:
a. To select the administrator password that you want to configure on the deployed OS, in the
Administrator password box, type the administrator password.
b. In the Confirm administrator password box, retype the password again to confirm.
NOTE: It is critical to update the password within this template. The value in the template is
masked, but the actual password is not set. If this password is not set, you cannot log in to
the deployed server.
c. From the OS Image drop-down list, select an OS image that is configured and to be deployed in
your ASM managed environment.
8. Under Network Settings, update the network settings accordingly for the hypervisor that you are
deploying and for the configured networks in your environment.
9. To save the settings, click Save.
10. To publish the template, click Publish Template.
The template is now ready to be deployed.
Template – deploy physical server and virtual machine
This template deploys two virtual machines to an existing cluster in vCenter.
1. On the Templates page, select the Deploy Physical Server and Virtual Machine, and then click
Clone in the right pane.
2. In the Create Template dialog box, enter the Template Name and Template Description.
3. In the Template Builder, click the server component, click Edit in the dialog box that is displayed, and
then in the Server Component dialog box, perform the following configurations:
a. In the Component Name text box, type the component name. (Optional)
b. Under Hardware Settings, from the Server Pool drop-down list, select the corresponding server
pool.
70