Users Guide

Field Name Description

Enter the comma-separated list containing the IP addresses or IQN

addresses. The list should not contain a white space.

A valid IP address list must be in the format:

172.19.15.2,172.19.15.3,172.19.15.4

A valid IQN address list must be in the format: iqn.

2001-05.com.dellsoftware01,iqn.2001-05.com.dellsoftware02,iqn.

2001-05.com.dellsoftware01

Compellent Storage Settings

Target Compellent Device Specifies the compellent storage device where the volume is created.

Storage Volume Specifies the name of the volume that is to be created or destroyed.

Storage Size e.g 100g Specifies the volume size. Enter the number of 512-byte blocks or the total

byte size. To specify a total byte size, use k for kilobytes, m for megabytes,

g for gigabytes, or t for terabytes.

Boot Volume Specifies if the mapped volume is designated to be a boot volume.

Volume Folder Specifies the name of an existing volume folder where a volume is to be

created. In case the folder does not exist, a new folder is created.

Purge Volume This property indicates that the volume must be purged. If the purge

option is not specified, the volume is still visible using the volume show

command and contains the status of the Recycled. The possible values are

yes or no. The default value is yes.

Volume Notes Specifies the notes for the volume. By default, no notes are included.

Replay Profile Specifies the replay profiles for the volume.

Storage Profile Name Specifies the replay profiles for the volume.

Server Notes Specifies the optional user notes associated with the server.

Operating System Type Specifies the operating system type, which is set in the compellent server

object of the compellent storage center.

Server Object Folder Specifies the folder for the server.

Server WWN Values Specifies a globally unique World Wide Name (WWN) for the requested

HBA.

Port Type Refers to the transport type for all HBAs being added. This option is

required if the manual flag is set. The possible values are FibreChannel and

iSCSI.

Manual This parameter sets an optional flag to configure the requested HBAs

before the HBAs are discovered. If the WWN matches a known server port,