Users Guide

You can also clone an existing template while creating a new template. For more details, refer to the
Create a Template topic.
3. Enter a Template Name and Template Description (Optional), and click Save.
Deploying service
NOTE: You cannot deploy a service using a template that is in draft state. Publish the template
before you use the template to deploy a service.
To deploy a service:
1. In the left pane, click Services.
The Services page is displayed.
2. On the Services page, click Deploy New Service.
The Deploy Service wizard is displayed.
3. In the Service Information page, perform the following steps, and click Next.
a. From the Select Template drop-down list, select the template to deploy a service.
b. Enter the Service Name (required) and Service Description (optional) that identifies the service.
c. If you want to update the firmware running on the servers that are part of the service, select
Manage Server Firmware check box, and from the Use Firmware Repository drop-down, select
a firmware repository.
NOTE: Changing the firmware repository could update the firmware level on servers for
this service. Firmware on shared devices will still be maintained by the global default
firmware repository.
d. If you want to grant permission for Standard users to use this service, under Manage Service
Permissions, select the In addition to all Admins, grant Standard Users access to this service
check box, and perform one of the following actions:
• To grant access to all Standard users for this service, select All Standard Users option.
• To grant access only to specific Standard users for this service, select Specific Standard
Users option, and perform the following tasks:
a. Click Add User (s) to add one or more Standard users to the list.
To remove the Standard user from the list, select the Standard user and click Remove
User(s).
b. After adding the Standard users, select or clear the check box next to the Standard users
to grant or block access to the service.
4. In the Deployment Settings page, configure hardware and OS settings. click Next.
Configuring Hardware and Os Setting:
a. Select server source from Server Source drop-down menu.
you can select Server Pool or Manual Entry from Server Source drop-down menu.
b. Select server pool from Server Pool drop-down menu.
If you select Server Pool from Server Source drop-down menu, in that case you get only Global
option to select from Server Pool drop-down menu, . If you select Manual Entry, instead of
Server Pool, Choose Server drop-down menu will be displayed. From the Choose Server drop-
45