Release Notes
•
ASM-3497: Filtering error message for insufficient user privileges needs to be enhanced
.
o
When a user with insufficient privileges to a server pool tries to kick off a
deployment, the filtering code does not allow the deployment to be kicked
off and the following error message is displayed:
{=0 servers could be chosen for deployment}
•
ASM-3463: Compellent deployment fails if you type apostrophes (') or other special
characters in some fields.
o
When you try to enter apostropes or any other special characters in a field
the compellent deployment fails. You should not enter apostropes or special
characters.
•
ASM-2599: Issue with Configure Resources when IOM Firmware is out-of-date with
minimum Firmware requirements.
o
The following error message is displayed while configuring resources when a
firmware running on the I/O module does not meet the minimum
requirements. If the IOM firmware is not within the Compatibility Matrix
minimum firmware, This error is displayed when it attempts to show the
discovered resources.
An Unexpected error has occurred on the system Please try again later.
o
You must update the I/O module firmware and retry initial discovery and
configuration of the chassis.
•
ASM-3892: Firmware update for 12th generation blades with intel cards and Broadcom
card fails in some cases when Intel NICs are installed.
o
Updating Intel X520 cards with versions earlier than 15.5.0 to 16.5.x requires a
manual update to 15.5.0, prior to upgrading to 16.5.x with ASM.
•
ASM-4007: ASM 8.1 has a default update repository
of http://linux.dell.com/repo/ASM/current. When you try to update the appliance with the
default repository path the appliance update fails.
o
Select the edit option for "Update Repository Path". An edit window is
displayed and no changes are required in the edit window. Select
Save
to set
the updated configuration files. You can then proceed with the appliance
update.
Li
mitations
None
Installation Prerequisites
For installation Pre-requisites, see the “Active System Manager 8.1 Installation Guide”.
Installation Procedure