Users Guide

5. Under <Port number>, if you want to partition the port, select the Do you want to partition? check

box.

6. Perform the following steps for each port and partitions:

a. In the Network (vLAN) column, select the network that you want to configure on the port and

partition.

b. Enter the Minimum Bandwidth and Maximum Bandwidth in percentage.

7. Repeat the steps 4 through 6 for each port and partition.

8. Click Add.

Importing Configuration from Reference Server

The Importing Configuration From Reference Server feature enables you to import an existing server

configuration and set and use it for the new server component settings. You can edit the settings after

importing the configuration.

To import a server configuration, perform the following steps:

1. On the Server Component Settings page, click Import Configuration from Reference Server.

2. After you click Import Configuration from Reference Server, the Select Reference Server window

appears. Click Select on the window.

3. List of available reference servers is displayed. Select the server which you want to import as

reference server from the list.

4. Click Select.

ASM does not only import basic setting from reference server but also imports all the BIOS setting

and advance RAID configuration from the reference server and allows you to edit the configuration.

After you configure the settings and save it, you will be able to deploy a service with the

configuration. All the BIOS setting and RAID setting will get applied to target server.

NOTE: ASM does not only import basic setting from reference server but also import all the

BIOS setting and advance RAID configuration from the reference server and allow you to edit

the configuration

For some BIOS settings, they may become not applicable when other BIOS settings are applied. ASM

does not correct these setting dependencies. When setting advanced BIOS settings use caution and

verify BIOS settings on the hardware are applicable when not choosing "Not Applicable" as an option.

For example, when disabling SD card the settings for "Internal SD Card Redundancy" becomes not

applicable..

Importing from existing template

The Importing From Existing Template feature enables you to import configuration from a server which

is already there in an existing templates. You can edit the settings after importing the configuration from

existing template.

To import a configuration from a server which is already part of an existing template, perform the

following stasks:

1. On the Server Component Settings page, click Import from Existing Template.

2. On the Select Component page, select a server under a template to import the configuration.

3. Click Select.

It will import the configuration from existing template.