Users Guide

The Services page is displayed.
2. On the Services page, click Deploy New Service.
The Deploy Service wizard is displayed.
3. In the Service Information page, perform the following steps, and click Next.
a. From the Select Template drop-down list, select the template to deploy a service.
b. Enter the Service Name (required) and Service Description (optional) that identifies the service.
c. If you want to update the firmware running on the servers that are part of the service, select
Manage Server Firmware check box, and from the Use Firmware Repository drop-down, select
a firmware repository.
NOTE: Changing the firmware repository could update the firmware level on servers for
this service. Firmware on shared devices will still be maintained by the global default
firmware repository.
d. If you want to grant permission for Standard users to use this service, under Manage Service
Permissions, select the In addition to all Admins, grant Standard Users access to this service
check box, and perform one of the following actions:
• To grant access to all Standard users for this service, select All Standard Users option.
• To grant access only to specific Standard users for this service, select Specific Standard
Users option, and perform the following tasks:
a. Click Add User (s) to add one or more Standard users to the list.
To remove the Standard user from the list, select the Standard user and click Remove
User(s).
b. After adding the Standard users, select or clear the check box next to the Standard users
to grant or block access to the service.
4. In the Deployment Settings page, configure hardware and OS settings. click Next.
Configuring Hardware and Os Setting:
a. Select server source from Server Source drop-down menu.
you can select Server Pool or Manual Entry from Server Source drop-down menu.
b. Select server pool from Server Pool drop-down menu.
If you select Server Pool from Server Source drop-down menu, in that case you can view all user
defined server pools along with the Global pool. Standard users can see only the pools that they
have permission. If you select Manual Entry, instead of Server Pool, Choose Server drop-down
menu will be displayed. From the Choose Server drop-down menu, you can manually select
server with its service tag for deployment from the list under the Choose Server drop down
menu.
c. Under OS Settings section, From Management IP Source drop down menu, you can select ASM
selected IP, Hostname DNS Lookup or Manual Entry.
At the time of deployment, if you have set up network in advance and you have set up few
template. Select ASM Selected IP, from Management IP Source drop-down menu.
If you have DNS Setting in template of the deployed service, select Hostname DNS Lookup from
Management IP Source drop-down menu.
You can select Manual Entry option even from Management IP Source drop-down menu., If you
select Manual Entry, Management IP Addressfield will be displayed. You can type IP adress which
44