Setup Guide

Specification Prerequisite
!
interface TenGigabitEthernet 0/41
no ip address
mtu 12000
dcb-map DCB_MAP_PFC_OFF
!
port-channel-protocol LACP
port-channel 1 mode active
!
protocol lldp
advertise management-tlv management-address
system-name
no advertise dcbx-tlv ets-reco
dcbx port-role auto-upstream
no shutdown
FTOSA1#
VMware vCenter 5.1, 5.5 or 6.0
• VMware vCenter 5.1, 5.5 or 6.0 is configured
and accessible through the management and
hypervisor management network.
• Appropriate licenses are deployed on the
VMware vCenter.
System Center Virtual Machine Manager (SCVMM)
• See System Center Virtual Machine Manager
(SCVMM) Prerequisites.
PXE Setup
• Either use Active System Manager as the PXE
responder by configuring through ASM user
interface, by Getting Started page or follow
instructions in Configuring ASM Virtual
Appliance as PXE Responder.
Dell PowerEdge M1000e chassis
• Server facing ports must be in hybrid mode.
• Server facing ports must be in switchport
mode.
14