Release Notes
•
Issue: ASM-2144
: Server with bare hard drive fails to get HddSeq set properly
o
Description
: If you choose SD boot and the server has a bare hard drive (not
connected through a RAID controller) the HddSeq may fail to get set properly,
Leaving the bare hard drive at the top of the list. The server may boot off the
bare hard drive instead of the SD card where the operating system was
installed.
Resolution/Workaround
: None
•
Issue: ASM-2287
: The server teardown operation does not remove the Active Directory
and DNS entries of the servers.
o
Description
: If you tear down servers in a service, Active Directory and DNS
entries of the server are not removed if the associated cluster is not selected
for tear down. In addition, in some cases, if ASM is unable to communicate
with the Active Directory or DNS server, these entries may also not be
removed.
Resolution/Workaround:
To remove the Active Directory and DNS entries of
the server, make sure to select the associated cluster. If the issues persist,
confirm that the Active Directory and DNS entries have been removed from
the server manually.
•
Issue: ASM-2381
: In Mozilla Firefox, IQN/IPs are displayed as mandatory for Hyper-V
template.
o
Description
: If you open ASM in Mozilla Firefox and update Hyper-V template,
ASM prompts you to enter IQN/IPs, which are not valid.
Resolution/Workaround
: Use Google Chrome to update Hyper-V template.
•
Issue: ASM-2382
:
During volume scale up, duplicate volume lists existing volumes
.
o
Description
: During volume scale up, if you select the Duplicate option, the
existing volumes are displayed.
Resolution/Workaround
: If we select a volume that does not match the
duplicated resource, then there will be no duplicating.
•
Issue: ASM-2411
: Multiple app components of the same type connected to the same VM
or server do not run both.
o
Description
: If multiple app components of the same type, for example
"Windows Post Install" are connected to the same VM or server component,
only one of the app components will run.
Resolution/Workaround
: For Windows or Linux post install script
components, ensure that you include all functionality in a single target script.
For SQL and Citrix applications, only a single instance can be selected.
•
Issue: ASM-2599
: Issue with Configure Resources when IOM Firmware is out-of-date with
minimum firmware requirements.
o
Description
: The following error message is displayed while configuring
resources when a firmware running on the I/O module does not meet the
minimum requirements. If the IOM firmware is not within the Compatibility
Matrix minimum firmware, The following error is displayed when it attempts
to show the discovered resources.
An Unexpected error has occurred on the system Please try
again later.
Resolution/Workaround
: You must update the I/O module firmware and
retry initial discovery and configuration of the chassis.
•
Issue: ASM-2951
: Error message is displayed during firmware update on C series.
o
Description
: While performing firmware update on C series servers, the
health status of the C series switch changes to <gray> and the following error
message is displayed.