Users Guide

• Service Tag — Displays the service tag for the server. The service tag is a unique identifier

provided by the manufacturer for support and maintenance. If the server is absent, this field is

empty.

• Slot — Identifies the server location.

• Management IP — Displays the management IP address of the server.

2. If you want to modify the iDRAC DNS Name of the server, in the iDRAC DNS Name column, enter an

iDRAC DNS name for the server.

3. Click Next to configure the IO modules within the chassis.

Configuring unique I/O module settings

1. On the Unique I/O Module Settings page, select Configure Unique I/O Module Settings check box

to modify the unique settings for the IO modules with in the chassis.

The Unique I/O Module Settings page lists the I/O modules within the chassis that you have

selected. Each section in this page lists the I/O modules within a chassis. Click the arrow left to the

section to expand or collapse the section.

The page displays the following information about the I/O modules that have been discovered:

• Service Tag — Displays the service tag of the I/O module. The service tag is a unique identifier

provided by the manufacturer for support and maintenance.

• Fabric Slot — Indicates the slot name where the I/O module is present.

• Management IP — Displays the management IP address of the server.

• Host Name — Displays the host name of the of the I/O module.

2. If you want to modify the host name of the I/O module, in the Host Name column, enter the host

name for the corresponding I/O modules.

3. Click Finish to configure the uplink ports.

Configuring uplink ports

Use this page to configure uplinks on the MXL Switches within one or more chassis.

NOTE: ASM supports configuration of uplinks only on MXL Switches. For the IOAs that are not

supported, you cannot configure uplinks on the ports.

From this page, you can:

• Define the uplinks. see Defining Uplinks.

• Configure the uplinks in one of the following ways:

– Configure the same ports as uplink ports in all the chassis. See Configure the uplink ports

differently in all the chassis

– Configure the uplink ports differently in all the chassis. See Configuring Uplink Ports on All Chassis

Independently