Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerActive System Manager Release 8.0
41424344454647484950
Target Boot Device Description
Language Specifies the language to be displayed in the installed operating system.
That is, Windows operating system.
Keyboard Specifies the key board language to be used during Windows installation.
Domain Name Specifies the domain name to which you want to add the host. For
example, aidev
FQ Domain Name Specifies the Fully Qualified Domain Name (FQDN) to which you want to
add the host. For example, aidev.com
Domain Admin Username Specifies the username to access the domain.
Domain Admin Password Specifies the admin password to add the host to the domain.
Domain Admin Password
Confirm
Enables you to reconfirm the admin password to add the host to the
domain.
Custom Installation OS
Script
Refers to ASM maintained kickstart scripts or unattend.xml customer
specific scripts to be used as a part of unattend OS install.
NOTE: After entering the information about PXE network in the respective field as described in the
table here, ASM will untag vLANs entered by the user in the PXE network on the switch server facing
port. In case of vMotion and Hypervisor network, for the entered information ASM will tag these
networks on the switch server-facing ports. In case of Rack Server, ASM will configure those vLANs
on TOR server facing ports (untag PXE vLANs, and tag other vLANs). In the case for Blade Servers,
ASM will configure those vLANs on the IOM server facing ports (untag PXE vLANs and tag other
vLANs).
Configuring interface on rack servers
To add a server interface:
1. In the Server Component dialog box, select Rack Server option under Targeted Server Type:
2. For Rack Servers, under Interfaces, click Add New Interface.
3. From the NIC Type, select the NIC type:
• 2 Port
• 4 Port
4. Select the Used for FC check box, if you want to use the NIC for Fibre Channel.
5. Under specific ports, if you want to partition the port, select the Do you want to partition? check
box.
6. Enter the following information for each ports or partitions:
a. Select the vLAN Networks to use for data transmission
b. Enter the Minimum Bandwidth and maximum bandwidth in percentage.
7. Repeat the steps 4 through 6 for each port.
8. After configuring interfaces, you can configure NIC Teams.
9. Click Add.
46