Users Guide

Target Boot Device Description
Hardware Settings
Target Boot Device Specifies the target boot device ( for example: Local Hard Drive or SD
card).
System Profile Select the system power and performance profile for the server.
User Accessible USB Ports Enables or disables the user accessible USB ports.
Number of Core Processors Specifies the number of enabled cores per processor.
Processor Virtualization
Technology
If this is enabled, the additional hardware capabilities provided by
virtualization technology are enabled.
Logical Processors Each processor core supports up to two logical processors. If enabled,
the BIOS reports all logical processors. If disabled, the BIOS reports only
one logical processor per core.
Memory Node Interleaving If the system is configured with matching memory, enables memory
node interleaving. If disabled the system supports non-uniform memory
architecture memory configurations.
Execute Disable Enables or disable execute disable memory protection
Server Pool Specifies the pool from which servers are selected for the deployment.
OS Settings
OS Image Type Refers to the operating system types that are available for deployment,
such as Red Hat, Linux, Windows, and Hyper-V. The image type
corresponds to the installers that are shipped with ASM for installing a
particular type of operating system. For example, you can install Red Hat
6.1, 6.2, 6.3 images and install them all with the Red Hat image type.
NOTE: Based on the value selected from the OS Image Type drop-
down list, the fields related to that OS type are displayed.
OS Image Specifies the target repository where the OS image install files are
located. The default repositories are ESXi. The additional repositories are
shown if the user created them on the ASM appliance.
Administrator password Enter the administrator password that set on the installed OS.
Confirm administrator
password
Enter to confirm the administrator password.
Install EqualLogic MEM If the value is True, install EqualLogic Multipathing Extension Module.
Product Key Specifies the product key to install the OS image on the server.
Timezone Specifies the time zone of the server.
NTP Server Specifies the IP address of the NTP server for time synchronization.
45