Users Guide

Deploy service

Exporting service details

Updating firmware

Retry failed service

Adding components to existing service deployments

Deleting service

Deleting resources from service

Migrating servers

Component deployment states

After you deploy a service, ASM assigns one or more states to the components based on the deployment

status.

The following are different types of states displayed at a component level:

• Pending — Indicates that, within a service, the deployment is not yet started for the particular

components.

• In Progress — Indicates that, within a service, service deployment is in progress for the particular

components.

• Complete — Indicates that, within a service, the service deployment is completed for the particular

components.

• Error — Indicates that, with in a service, service deployment is not successful for the particular

components.

• Cancel — Indicates that, within a failed service, deployment is not yet started for the particular

components and canceled due to other component (s) deployment failure.

Editing service information

To edit the information of a service:

1. In the left pane, click Services.

2. On the Services page, click the service, and in the right pane click View Details.

3. On the <service name> Details page, in the right pane, next to Service Information section title, click

Edit.

4. In the Edit Service Information dialog box, perform the following steps:

a. Modify the Service Name and Service Description that identifies the service.

b. If you want to update the firmware running on the servers that are part of the service, select

Manage Server Firmware check box, and from the Use Firmware Repository drop-down list,

select a firmware repository.

NOTE: Changing the firmware repository could update the firmware level on servers for

this service. Firmware on shared devices will still be maintained by the global default

firmware repository.