Users Guide

6. Under

EqualLogic Storage Settings, configure the following:

a. From the Target EqualLogic drop-down list, select your target EqualLogic iSCSI array.

b. In the Storage Volume Name text box, type a unique name.

c. In the Storage Pool, Storage Size, Thin Provisioning, Snapshot Reserve %, Thin Min Reserve %,

Thin growth Warning %, Thin growth Maximum %, Thin warning on threshold %, Multi-Host

access of volume text boxes, update the values.

d. From the Authentication drop-down list, select authentication type as CHAP.

e. In the Chap Username and Chap Secret text boxes, type the CHAP user name and CHAP secret

for the volume access.

7. In the Template Builder, select the server component, click Edit in the dialog box that is displayed,

and then configure the following settings in the Server Component dialog box. Repeat this step for

both the servers.

a. In the

Component Name text box, type the component name. (Optional)

b. Under Hardware Settings section, configure the following:

1. Retain the value of Target Boot Device as default value of SD Card.

2. From the Server Pool drop-down list, select corresponding server pool.

c. Under OS Settings, configure the following:

1. To select the administrator password that configures on the deployed OS, in the

Administrator password text box, type the administrator password. In the Confirm

administrator password

box , type the password again to confirm.

NOTE

: It is critical to update the password within this template. The value in the

template is masked, but the actual password is not set. If this password is not set, you

cannot log in to the deployed server.

2. Retain the ESXi value as default in the OS Image Type drop-down list.

3. From the OS Image drop-down list, select an OS for a hypervisor (Example: ESXi 5.1 or ESX

5.5) which is configured to be deployed within your ASM managed environment.

d. Under Network Settings section, update the network settings accordingly for the hypervisor

you are deploying and for the configured networks in your environment.

8. In the Template Builder, click a cluster component, and click Edit in the box that is displayed, and

then configure the following settings in the Cluster Component dialog box.

a. Under Cluster Settings, configure the following:

1. From the Target Hypervisor

drop-down list, select the target vCenter.

2. Under Cluster Settings, in the Data Center Name and Cluster Name text boxes, type their

corresponding names.

9. To save the settings, click

Save.

10. To publish the template, click Publish Template

The template is now ready to be deployed.

Template – Deploy Hyper-V Host with iSCSI Storage

The

Deploy Hyper-V Host with iSCSI Storage template deploys two iSCSI storage volumes and installs

Hyper-V on a physical host.