Users Guide

You may have to wait while ASM locates and displays all the resources that are connected to the

managed networks.

5. On the Discovered Resources page, select the resources from which you want to collect the

inventory data, and click Finish.

The discovered resources are listed in the Resources page.

Related Links

Adding IP Address Range and Credentials

Collecting the Resource Inventory

Adding IP Address Range and Credentials

1. On the Discover Resources page, click Add New.

2. In the Add IP Address Range dialog box, perform the following steps, and click Save.

a. Type the Starting IP Address and Ending IP Address (optional) of the resources range that you

want to discover.

b. Under Include Resources, select the resources types.

Active System Manager discovers only the selected resource types within the specified IP

address range.

c. Select the Dell default credentials or existing credentials from the corresponding resource

credentials drop-down list. ASM uses the specified credentials to access the resources.

d. To use new credentials to access the resources, click Add New next to the corresponding

credentials types.

NOTE: For Dell resources (chassis, servers, and I/O modules), use the default root-level user

name root, and password calvin for discovery. However, the default root-level credentials are

not supported for Dell Compellent Storage Center and Dell EqualLogic Storage.

3. To discover resources of the same type with different credentials, repeat the step 2.

4. Click Next to discover and collect the inventory data from the resources.